Slia：创建页面，内容为“To '''create and calibrate a Tool using UCC Server''' it is necessary to: * Create a Component * Create a Tool * Calibrate the Tool In order to create the new tool…”

2018-06-04T12:25:22Z

创建页面，内容为“To '''create and calibrate a Tool using UCC Server''' it is necessary to: * Create a Component * Create a Tool * Calibrate the Tool In order to create the new tool…”

新页面

To '''create and calibrate a Tool using UCC Server''' it is necessary to:
* Create a Component
* Create a Tool
* Calibrate the Tool

In order to create the new tool, Arco shall be off and UCC Server shall be run.

==Create a Component==
#Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
#Select the '''"Machine"''' tab
#In the any blank space: ''right click -> Add Component...'': the '''"Builder"''' is activated
#Build the component by selecting the correspondent items from the list
#When the component in built, click '''"Save Component"''' icon
#Type the name of the component and press '''"v"''' to confirm
#Click on '''"Restart Tool Assembly"''' icon to create a new component or finish (press ''Yes'' to confirm). At this stage, if a new tool is being creating it is possible to [[jump]] at step 5 of the '''"Create Tool"''' procedure.
#Select the '''"Machine"''' tab

==Create a Tool==
#Make sure the '''"View"''' tab on the right side on UCC Server Interface is activated
#Select the '''"Machine"''' tab
#*In the any blank space: ''right click -> '''Add Tool...''''': select '''"Assembly Tool"''' and press '''"v"''' to confirm
#Select a previously defined component from the list and press the '''"+"''' button to add it
#Click on '''"Create as New Tool"''' icon and give the tool a name. Press '''"v"''' to confirm
#Click on '''"Restart Tool Assembly"''' to finish (press ''Yes'' to confirm)
#Select the '''"Machine"''' tab

==Calibrate the Tool==
#Right Click on a previously created Tool
#Select '''"Change Tool"''' to activate (if a tool changer is present the change tool operation will be automatically performed, if it is not present, then the software will ask to detach the current component and attach the correct one if needed). '''The head will rotate without any extra warning'''.
#Right Click on the current tool (identified by a ''"tick"'' on its name)
#Select '''"Calibrate"''' and follow the procedure shown by the [[messages]] to perform the calibration.

[[it:Calibrare uno strumento con UCC Server]]
[[zh-cn:使用UCC服务器校准工具]]
[[pt:Calibre uma ferramenta com o servidor UCC]]
[[de:Kalibrieren Sie ein Tool mit UCC Server]]
[[es:Calibrar una herramienta con el servidor UCC]]
[[en:Calibrate a Tool With UCC Server]]

使用UCC服务器校准工具 - 版本历史

Slia：创建页面，内容为“To '''create and calibrate a Tool using UCC Server''' it is necessary to: * Create a Component * Create a Tool * Calibrate the Tool In order to create the new tool…”