測線算法計算

從 ArcoWiki
於 2018年6月12日 (二) 12:47 由 Slia (對話 | 貢獻) 所做的修訂 (创建页面,内容为“It was added the possibility to calculate a straight line measured with a projection plane instead of lying plane indicated by the DMIS standard.<br /> To select…”)
(差異) ←上個修訂 | 最新修訂 (差異) | 下個修訂→ (差異)
跳到: 導覽搜尋

It was added the possibility to calculate a straight line measured with a projection plane instead of lying plane indicated by the DMIS standard.
To select the calculation type you have to act on the panel "Options" and set one of two modes:


ReadMe image055.jpg


The choice of the straight line "line on plane" allows the selection, in the self-teach panel, of the projection plane instead of the lying plane.
ReadMe image054.jpg

After the measurement of the points, the straight line is calculated through a dedicated statement:
ReadMe image056.jpg


The use of "Line on Plane" mode does not include, in the current implementation, the canned cycles.
The computing instruction can be performed at any row in the program but it is self-teached only during the measurement of the straight line.