CNC模式

来自ArcoWiki
Slia（讨论 | 贡献）2018年6月1日 (五) 10:03的版本 （创建页面，内容为“'''CNC Mode''' is the state of the CMM that allows automatic movements. The DMIS enhance two different attitudes based on the CNC Mode selected: *MODE/P…”）
(差异) ←上一版本 | 最后版本 (差异) | 下一版本→ (差异)
跳转至： 导航， 搜索

CNC Mode is the state of the CMM that allows automatic movements.

The DMIS enhance two different attitudes based on the CNC Mode selected:

  • MODE/PROG,MAN: The CMM is in PROGRAMMED mode, the path is determined by the commands listed in the MEAS/ENDMES block and the inspection will be performed following the PTMEAS commands.
  • MODE/AUTO,PROG,MAN: The CMM is in AUTOMATIC mode, if the measuring feature has an canned cycle, then this will be performed even if the MEAS/ENDMES block contains PTMEAS commands.

The custom canned cycles (Non-Dmis standard) enhanced by ARCO, if set, are also executed in AUTO mode.

取自“https://zh-cn.arcowiki.com/index.php?title=CNC模式&oldid=32”